[Mondo-devel] Mindi.iso not starting on Proliant GL 460 Gen9 after NFS backup of RHEL 6.5

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

[Mondo-devel] Mindi.iso not starting on Proliant GL 460 Gen9 after NFS backup of RHEL 6.5

Flory, Martin Esteban

I followed the instructions in http://trac.mondorescue.org/browser/branches/3.0/mindi/README.ProLiant And in all the FAQ and docs I could find.

 

/etc/exports on the nfs server is:

/cdr/backups 10.167.149.32/27(rw,nohide,insecure,no_subtree_check,async)

 

/etc/fstab on the nfs client contains a line:

10.167.149.45:/cdr/backups      /mnt/nfs        nfs4

 

I was able to create the backup with the command…

 

mondoarchive -OVn nfs://10.167.149.45:/cdr/backups -E "/mnt/nfs|/var/crash|/var/lib/libvirt/images|/var/opt/OC/ocmp446|/var/opt/OC/Voicebase/|/var/opt/OC/iso" -g -s 200m -p flohpocmp1

 

I all seems to work OK. I see some errors in the hardware part but I think I  have all the drivers required.

 

INFO: Using bash as default shell

INFO: udev device manager found

INFO: Copying udev related files with cp -a --parents /lib64/libexpat.so.1 /lib64/libexpat.so.1.5.2 /lib64/libglib-2.0.so.0 /lib64/libglib-2.0.so.0.2600.1 /lib64/libgobject-2.0.so.0 /lib64/libgobject-2.0.so.0.2600.1 /lib64/libgthread-2.0.so.0 /lib64/libgthread-2.0.so.0.2600.1 /lib64/libpci.so.3 /lib64/libpci.so.3.1.10 /sbin/biosdevname /sbin/consoletype /sbin/start_udev /sbin/udevadm /sbin/udevd /usr/bin/consolehelper /usr/bin/dbus-binding-tool /usr/bin/dbus-launch /usr/bin/halt /usr/bin/poweroff /usr/bin/reboot /usr/lib64/libdbus-glib-1.so.2 /usr/lib64/libdbus-glib-1.so.2.1.0 /usr/lib64/libX11.so.6 /usr/lib64/libX11.so.6.3.0 /usr/lib64/libXau.so.6 /usr/lib64/libXau.so.6.0.0 /usr/lib64/libxcb.so.1 /usr/lib64/libxcb.so.1.1.0  -t /tmp/mondo.tmp.YhRlpX/mountpoint.27098/

INFO: Detected a ProLiant BL460c Gen9. Nice. Continue to support my job :-)

INFO: Activating ProLiant support for mindi

INFO: You can install SDR packages to benefit from mindi's enhanced ProLiant support

INFO: Get them from http://downloads.linux.hpe.com/SDR/

INFO: Found /usr/sbin/hpacuscripting, activating enhanced HP ProLiant support in mindi

ERROR: Hardware support may not be complete as per /usr/sbin/hpacuscripting exit code

INFO: Found /opt/compaq/hpacucli/bld/.hpacuscripting, activating enhanced HP ProLiant support in mindi

ERROR: Hardware support may not be complete as per /opt/compaq/hpacucli/bld/.hpacuscripting exit code

INFO: Found /opt/compaq/hpacucli/bld/libcpqimgr-x86_64.so, activating enhanced HP ProLiant support in mindi

ERROR: Hardware support may not be complete as per /opt/compaq/hpacucli/bld/libcpqimgr-x86_64.so exit code

INFO: Found /sbin/hponcfg, activating enhanced HP ProLiant support in mindi

HP Lights-Out Online Configuration utility

Version 4.6.0 Date 09/28/2015 (c) Hewlett-Packard Company, 2015

Firmware Revision = 2.10 Device type = iLO 4 Driver name = hpilo

Management Processor configuration is successfully written to file "/tmp/mondo.scratch.aBSQtW/images/bkphw/hponcfg.dat"

INFO: Found /sbin/hp-conrep, activating enhanced HP ProLiant support in mindi

INFO: Found /sbin/hp-rcu, activating enhanced HP ProLiant support in mindi

 

After the backup, I enter iLo, mount the virtual cd/dvd-rom with the mindi.iso, reboot and… select Compare on the boot menu.  It tries to start but hangs with the following message….

 

Trying to allocate 1005 pages for VMLINUZ

[Linux-EFI, setup=0x1072, size=0x3ecab01]

      [Initrd, add=0x6ef7b000, size=0x2a4824aJ]

 

 

I tried everything I could think of, any help would be greatly appreciated.

 

Martín


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Mondo-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/mondo-devel

mondoarchive.z_i_p (103K) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Mondo-devel] Mindi.iso not starting on Proliant GL 460 Gen9 after NFS backup of RHEL 6.5

Flory, Martin Esteban
I'm copying the plain text version of the email here for easier reading...  sorry for the html.

From: Flory, Martin Esteban
Sent: jueves, 06 de octubre de 2016 05:41 p.m.
To: '[hidden email]' <[hidden email]>
Subject: Mindi.iso not starting on Proliant GL 460 Gen9 after NFS backup of RHEL 6.5

I followed the instructions in http://trac.mondorescue.org/browser/branches/3.0/mindi/README.ProLiant And in all the FAQ and docs I could find.

/etc/exports on the nfs server is:
       /cdr/backups 10.167.149.32/27(rw,nohide,insecure,no_subtree_check,async)

/etc/fstab on the nfs client contains a line:
       10.167.149.45:/cdr/backups      /mnt/nfs        nfs4

I was able to create the backup with the command.

       mondoarchive -OVn nfs://10.167.149.45:/cdr/backups -E "/mnt/nfs|/var/crash|/var/lib/libvirt/images|/var/opt/OC/ocmp446|/var/opt/OC/Voicebase/|/var/opt/OC/iso" -g -s 200m -p flohpocmp1

I all seems to work OK. I see some errors in the hardware part but I think I  have all the drivers required.

INFO: Using bash as default shell
INFO: udev device manager found
INFO: Copying udev related files with cp -a --parents /lib64/libexpat.so.1 /lib64/libexpat.so.1.5.2 /lib64/libglib-2.0.so.0 /lib64/libglib-2.0.so.0.2600.1 /lib64/libgobject-2.0.so.0 /lib64/libgobject-2.0.so.0.2600.1 /lib64/libgthread-2.0.so.0 /lib64/libgthread-2.0.so.0.2600.1 /lib64/libpci.so.3 /lib64/libpci.so.3.1.10 /sbin/biosdevname /sbin/consoletype /sbin/start_udev /sbin/udevadm /sbin/udevd /usr/bin/consolehelper /usr/bin/dbus-binding-tool /usr/bin/dbus-launch /usr/bin/halt /usr/bin/poweroff /usr/bin/reboot /usr/lib64/libdbus-glib-1.so.2 /usr/lib64/libdbus-glib-1.so.2.1.0 /usr/lib64/libX11.so.6 /usr/lib64/libX11.so.6.3.0 /usr/lib64/libXau.so.6 /usr/lib64/libXau.so.6.0.0 /usr/lib64/libxcb.so.1 /usr/lib64/libxcb.so.1.1.0  -t /tmp/mondo.tmp.YhRlpX/mountpoint.27098/
INFO: Detected a ProLiant BL460c Gen9. Nice. Continue to support my job :-)
INFO: Activating ProLiant support for mindi
INFO: You can install SDR packages to benefit from mindi's enhanced ProLiant support
INFO: Get them from http://downloads.linux.hpe.com/SDR/
INFO: Found /usr/sbin/hpacuscripting, activating enhanced HP ProLiant support in mindi
ERROR: Hardware support may not be complete as per /usr/sbin/hpacuscripting exit code
INFO: Found /opt/compaq/hpacucli/bld/.hpacuscripting, activating enhanced HP ProLiant support in mindi
ERROR: Hardware support may not be complete as per /opt/compaq/hpacucli/bld/.hpacuscripting exit code
INFO: Found /opt/compaq/hpacucli/bld/libcpqimgr-x86_64.so, activating enhanced HP ProLiant support in mindi
ERROR: Hardware support may not be complete as per /opt/compaq/hpacucli/bld/libcpqimgr-x86_64.so exit code
INFO: Found /sbin/hponcfg, activating enhanced HP ProLiant support in mindi
HP Lights-Out Online Configuration utility
Version 4.6.0 Date 09/28/2015 (c) Hewlett-Packard Company, 2015
Firmware Revision = 2.10 Device type = iLO 4 Driver name = hpilo
Management Processor configuration is successfully written to file "/tmp/mondo.scratch.aBSQtW/images/bkphw/hponcfg.dat"
INFO: Found /sbin/hp-conrep, activating enhanced HP ProLiant support in mindi
INFO: Found /sbin/hp-rcu, activating enhanced HP ProLiant support in mindi

After the backup, I enter iLo, mount the virtual cd/dvd-rom with the mindi.iso, reboot and. select Compare on the boot menu.  It tries to start but hangs with the following message..

       Trying to allocate 1005 pages for VMLINUZ
       [Linux-EFI, setup=0x1072, size=0x3ecab01]
             [Initrd, add=0x6ef7b000, size=0x2a4824aJ]


I tried everything I could think of, any help would be greatly appreciated.

Martín

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Mondo-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/mondo-devel

mondoarchive.z_i_p (103K) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Mondo-devel] Mindi.iso not starting on Proliant GL 460 Gen9 after NFS backup of RHEL 6.5

Bruno Cornec-4
Hello Martin,

Flory, Martin Esteban said on Tue, Oct 11, 2016 at 01:23:23PM +0000:
>I was able to create the backup with the command.
>       mondoarchive -OVn nfs://10.167.149.45:/cdr/backups -E "/mnt/nfs|/var/crash|/var/lib/libvirt/images|/var/opt/OC/ocmp446|/var/opt/OC/Voicebase/|/var/opt/OC/iso" -g -s 200m -p flohpocmp1

Ok. that's a good start ;-)

>I all seems to work OK. I see some errors in the hardware part but I think I  have all the drivers required.

Yes drivers are taken independantly of the HPE additional tools to re-setup the HW platform.

>After the backup, I enter iLo, mount the virtual cd/dvd-rom with the mindi.iso, reboot and. select Compare on the boot menu.  It tries to start but hangs with the following message..

You should use the flohpocmp1-1.iso file that has been generated to boot, not the mindi one.
Of course the mindi one should go further, but for what you try to do, use the other ISO.

Also in case it's not sufficient:
As you're using UEFI, check that you don't have SecureBoot on the target platform (I don't think you'd get that type of output, but to be sure)
Instead of compare, can you try with expert to see whether you go further or not (probably not, but again for the sake of completeness).

Bruno.
--
Open Source Profession, WW Linux Community Lead     http://www.hpintelco.net
HPE EMEA EG FLOSS Technology Strategist http://www.hpe.com/engage/opensource
FLOSS projects:    http://mondorescue.org         http://project-builder.org
Musique ancienne?   http://www.musique-ancienne.org  http://www.medieval.org

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Mondo-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/mondo-devel
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: [Mondo-devel] Mindi.iso not starting on Proliant GL 460 Gen9 after NFS backup of RHEL 6.5

Flory, Martin Esteban
In reply to this post by Flory, Martin Esteban
Hello Bruno, thanks for your reply.

I changed the iso for the flohpocmp1-1.iso, and got the same results.

Also I checked that SecureBoot, it said:
Current Secure Boot State               Disabled
Secure Boot Enforcement                [Disabled]

And finally... Tried expert with the same results.

Any other ideas? Thanks again and regards,

Martin


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Oct 2016 16:42:38 +0200
From: Bruno Cornec <[hidden email]>
Subject: Re: [Mondo-devel] Mindi.iso not starting on Proliant GL 460
        Gen9 after NFS backup of RHEL 6.5
To: Mondo mailing list <[hidden email]>
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=iso-8859-1; format=flowed

Hello Martin,

Flory, Martin Esteban said on Tue, Oct 11, 2016 at 01:23:23PM +0000:
>I was able to create the backup with the command.
>       mondoarchive -OVn nfs://10.167.149.45:/cdr/backups -E
>"/mnt/nfs|/var/crash|/var/lib/libvirt/images|/var/opt/OC/ocmp446|/var/o
>pt/OC/Voicebase/|/var/opt/OC/iso" -g -s 200m -p flohpocmp1

Ok. that's a good start ;-)

>I all seems to work OK. I see some errors in the hardware part but I think I? have all the drivers required.

Yes drivers are taken independantly of the HPE additional tools to re-setup the HW platform.

>After the backup, I enter iLo, mount the virtual cd/dvd-rom with the mindi.iso, reboot and. select Compare on the boot menu.? It tries to start but hangs with the following message..

You should use the flohpocmp1-1.iso file that has been generated to boot, not the mindi one.
Of course the mindi one should go further, but for what you try to do, use the other ISO.

Also in case it's not sufficient:
As you're using UEFI, check that you don't have SecureBoot on the target platform (I don't think you'd get that type of output, but to be sure) Instead of compare, can you try with expert to see whether you go further or not (probably not, but again for the sake of completeness).

Bruno.
--
Open Source Profession, WW Linux Community Lead     http://www.hpintelco.net
HPE EMEA EG FLOSS Technology Strategist http://www.hpe.com/engage/opensource
FLOSS projects:    http://mondorescue.org         http://project-builder.org
Musique ancienne?   http://www.musique-ancienne.org  http://www.medieval.org


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Mondo-devel mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/mondo-devel
Loading...